Coolsour Miniature Solenoid Valve, Refrigeration Fittings

Model NO.: C/D Series
Trademark: COOLSOUR
Origin: Zhejiang, China (Mainland)
HS Code: 8418991000
Model NO.: C/D Series
Trademark: COOLSOUR
Origin: Zhejiang, China (Mainland)
HS Code: 8418991000
Solenoid Valve - C Series 
Feature:
1.C Series solenoid valve is a 2-way normally colsed valve which applied into refrigerant or exhausting gas and water, or compressing air;
2.Coil can connect with plug-in connector which configured well with tree wires, so very convenient to install;
3.Coil can be chose with voltage: 24V,110V,220V,380V;
4.Working temperature: -40ºC~110ºC;
5.Max working pressure: 40 bar;
6.Max working differential pressure: 21 bar;
7.Max working circulation times: 100,000.
Model Connection orifice KV Nominal Capacity/KW
Inch mm m³/h R134A R22 R407C R404A
SVC1020/2 1/4" SAE 2.5 0.175 2.95 3.15 3.28 2.08
SVC1020/3 3/8" SAE 3 0.23 3.88 4.14 4.31 2.74
SVC1064/3 3/8" SAE 7 0.8 6.8 9.4 9.3 8
SVC1064/4 1/2" SAE 0.8 6.8 9.4 9.3 8
SVC1070/4 1/2" SAE 16.5 2.2 18.7 25.7 25.6 22
SVC1070/5 5/8" SAE 2.61 32.3 30.5 30.3 26.1
SVC1090/5 5/8" SAE 12.5 3.8 22.2 44.5 44.2 38
SVC1090/6 3/4" SAE 4.8 40.8 56.2 55.8 48
SVC1090/7 7/8" SAE 5.7 48.5 66.7 66.2 57
SVC1028/2 1/4" ODF 2.5 0.15 2.53 2.7 2.81 1.79
SVC1028/3 3/8" ODF 3 0.23 3.88 4.14 4.31 2.74
SVC1068/3 3/8" ODF 7 0.8 6.8 9.4 9.3 8
SVC1068/4 1/2" ODF 0.8 6.8 9.4 9.3 8
SVC1078/4 1/2" ODF 12.5 2.61 22.2 30.5 30.3 26.1
SVC1078/5 5/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1078/6 3/4" ODF 2.61 22.2 30.5 30.3 26.1
SVC1079/7 7/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1098/5 5/8" ODF 16.5 3.8 32.3 44.5 44.2 38
SVC1098/6 3/4" ODF 4.8 40.8 56.2 55.8 48
SVC1098/7 7/8" ODF 5.7 48.5 66.7 66.2 57
SVC1099/9 1-1/8" ODF 5.7 48.5 66.7 66.2 57


Solenoid Valve - D Series 
Feature:
1.D series solenoid valve is a direct acting or diaphragm valve which used into liquid pipe line for fluoride agents, suction or hot gas pipe line;
2.Widely used into frozen, refrigerated, air adjustment device, water flow system and so on;
3.Design medium temperature resistant: -40ºC ~ +105ºC;
4.Type: Normally closed type and Normally open type;
5.Coil current: AC or DC;
6.Connector: Flare or ODF braze;
7.Manual operation: With or without.
Model Connection KV Liquid, Nominal Capacity/KW
Inch m³/h R134A R22 R407C R404A/R507
SVD2(S) 1/4" 0.16  2.90  3.20  3.01  2.20 
SVD3(S) 1/4" 0.27  5.00  5.40  5.08  3.80 
3/8"
SVD6(S) 3/8" 0.80  14.80  16.10  15.13  11.20 
1/2"
SVD10(S) 1/2" 1.90  35.30  38.20  35.91  26.70 
5/8"
SVD15(S) 5/8" 2.60  48.30  52.30  49.16  36.50 
5/8"
7/8"
SVD20(S) 7/8" 5.00  92.80  101.00  94.94  70.30 
7/8"
1-1/8"
SVD22(S) 1-3/8" 6.00  111.00  121.00  113.74  84.30 
SVD25(S) 1-1/8" 10.00  186.00  201.00  188.94  141.00 
1-1/8"
SVD32(S) 1-3/8" 16.00  297.00  322.00  302.68  225.00 
1-5/8"
SVD40(S) 1-5/8" 25.00  464.00  503.00  472.82  351.00 
2-1/8"

Other Products:
Coolsour Miniature Solenoid Valve, Refrigeration Fittings

  Solenoid Valve - C Series 
Feature:
1.C Series solenoid valve is a 2-way normally colsed valve which applied into refrigerant or exhausting gas and water, or compressing air;
2.Coil can connect with plug-in connector which configured well with tree wires, so very convenient to install;
3.Coil can be chose with voltage: 24V,110V,220V,380V;
4.Working temperature: -40ºC~110ºC;
5.Max working pressure: 40 bar;
6.Max working differential pressure: 21 bar;
7.Max working circulation times: 100,000.
Model Connection orifice KV Nominal Capacity/KW
Inch mm m³/h R134A R22 R407C R404A
SVC1020/2 1/4" SAE 2.5 0.175 2.95 3.15 3.28 2.08
SVC1020/3 3/8" SAE 3 0.23 3.88 4.14 4.31 2.74
SVC1064/3 3/8" SAE 7 0.8 6.8 9.4 9.3 8
SVC1064/4 1/2" SAE 0.8 6.8 9.4 9.3 8
SVC1070/4 1/2" SAE 16.5 2.2 18.7 25.7 25.6 22
SVC1070/5 5/8" SAE 2.61 32.3 30.5 30.3 26.1
SVC1090/5 5/8" SAE 12.5 3.8 22.2 44.5 44.2 38
SVC1090/6 3/4" SAE 4.8 40.8 56.2 55.8 48
SVC1090/7 7/8" SAE 5.7 48.5 66.7 66.2 57
SVC1028/2 1/4" ODF 2.5 0.15 2.53 2.7 2.81 1.79
SVC1028/3 3/8" ODF 3 0.23 3.88 4.14 4.31 2.74
SVC1068/3 3/8" ODF 7 0.8 6.8 9.4 9.3 8
SVC1068/4 1/2" ODF 0.8 6.8 9.4 9.3 8
SVC1078/4 1/2" ODF 12.5 2.61 22.2 30.5 30.3 26.1
SVC1078/5 5/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1078/6 3/4" ODF 2.61 22.2 30.5 30.3 26.1
SVC1079/7 7/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1098/5 5/8" ODF 16.5 3.8 32.3 44.5 44.2 38
SVC1098/6 3/4" ODF 4.8 40.8 56.2 55.8 48
SVC1098/7 7/8" ODF 5.7 48.5 66.7 66.2 57
SVC1099/9 1-1/8" ODF 5.7 48.5 66.7 66.2 57


Solenoid Valve - D Series 
Feature:
1.D series solenoid valve is a direct acting or diaphragm valve which used into liquid pipe line for fluoride agents, suction or hot gas pipe line;
2.Widely used into frozen, refrigerated, air adjustment device, water flow system and so on;
3.Design medium temperature resistant: -40ºC ~ +105ºC;
4.Type: Normally closed type and Normally open type;
5.Coil current: AC or DC;
6.Connector: Flare or ODF braze;
7.Manual operation: With or without.
Model Connection KV Liquid, Nominal Capacity/KW
Inch m³/h R134A R22 R407C R404A/R507
SVD2(S) 1/4" 0.16  2.90  3.20  3.01  2.20 
SVD3(S) 1/4" 0.27  5.00  5.40  5.08  3.80 
3/8"
SVD6(S) 3/8" 0.80  14.80  16.10  15.13  11.20 
1/2"
SVD10(S) 1/2" 1.90  35.30  38.20  35.91  26.70 
5/8"
SVD15(S) 5/8" 2.60  48.30  52.30  49.16  36.50 
5/8"
7/8"
SVD20(S) 7/8" 5.00  92.80  101.00  94.94  70.30 
7/8"
1-1/8"
SVD22(S) 1-3/8" 6.00  111.00  121.00  113.74  84.30 
SVD25(S) 1-1/8" 10.00  186.00  201.00  188.94  141.00 
1-1/8"
SVD32(S) 1-3/8" 16.00  297.00  322.00  302.68  225.00 
1-5/8"
SVD40(S) 1-5/8" 25.00  464.00  503.00  472.82  351.00 
2-1/8"

Other Products:
Coolsour Miniature Solenoid Valve, Refrigeration Fittings

 

Thread Rolling Machine Model YY28-80

   This model is widely praised for its rational price, easy maintenance and high quality. Besides axial and radial process, it is used to process regular and irregular bolt, through screw etc. with optional embossing roller. The through screw made with this machine in ZheJiang Standard parts base has been exported to US, Canada and Europe.

Specifications:

Pressure of Roller max
150KN
Rotary Speed of Main Shaft
36,47,60,78(r/min)
Working Dia
4-48mm
Feed Speed of Movable shaft
5mm/s
OD of Roller
120-170mm
Thread Length
(no limits)
BD of Roller
54mm
Main Power
4kw
Roller Width max
100mm
Hydraulic Power
2.2kw
Dip Angle of Main Shaft
±5°
Weight
1700kg
Center Distance of Main shaft
120-240mm
Size
1480×1330×1440mm


Thread Rolling Machine Model YY-630
   This model mainly is used for various types of precision outer thread rolling, including the common thread, trapezoidal thread and modulus thread, workpiece to circular shape, straightening, rolling wrinkles, light and rolling work, Adapt rolling of material: elongation and tensile strength than 10% less than 1000N/mm² of various carbon steel, alloy steel and non-ferrous metal. 

Specifications:

Pressure of Roller max.
630KN
Dip Angle of Main Shaft
±10°
Working Dia
120mm
Rotary speed of Main shaft
8,14,21,33(r/min)
OD of Roller
260mm
Rolling Power
15kw
Roller Dia max
220mm
Hydraulic Power
7.5kw
BD of Roller
100mm
Cooling Power
0.25kw
Roller Width max
200mm
Weight
3000kg
Center Distance of Main shaft
210-380mm
Size
2100*2270*2330mm


Thread rolling machine Model YY160

   This model is characterized by rational and solid structure, great active force, low noise, low failure rate, convenient adjustment, high precision in processing screw thread, and wide application. It can have roll finishing on various external threads including regular, trapezoidal and modulus screw threads, and have molding, barreling and knurling processes on workpieces. Driven by worm gear and worm, equipped with an automatic lubrication system, manual, pedal, semi-automatic and automatic controls, it is easy in operation, high in production efficiency and low in labor intensity. Equipped with corresponding thread roller, it can process regular and abnormal bolts of various specifications.

Specifications:

Pressure of Roller max.
160KN
Rotary Speed of Main Shaft
25,40,60,100(r/min)
Rolling Material Diameter
4-56mm
Thread Length
(no limits)
Rolling round aperture
54mm
Main Power
5.5kw
Rolling round of the max weidth
130mm
Hydraulic Power
2.2kw
Dip Angle of Main Shaft
±5°
Weight
1830kg
Center Distance of Main shaft
120-240mm
Size
1450×1520×1430mm


Pictures for machine:

Thread rolling machine

Thread rolling machine

Thread rolling machine

Thread rolling machine

Thread rolling machine

Thread rolling machine



Training and Installation :
1. We offer installation service local in paid, reasonable charge. 
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation. 



Certification and after service:

1. Match the technology standard, ISO producing certification 
2. CE certification 
3. 12 months warranty since the delivery. Board. 



Our advantages:

1. Short delivery period. 
2. Effective communication 
3. Interface customized. 

Thread Rolling Machine

Thread Rolling Machine, Rebar Thread Rolling Machine,Two-Die Thread Rolling Machine,Solid Bar Thread Rolling Machine

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn